Avaya Configuring Bridging Services Manual de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
Configuring Bridging Services
1-18 114060 Rev. A
Parameter: Bridge MAC Address
Default: Defaults to a unique MAC address that the router automatically creates
based on the router’s backplane ID.
Options: Any valid 48-bit MAC-level address
Function: Combined with the Bridge Priority parameter, assigns a 64-bit bridge ID
to the router. Bridge Priority supplies the most significant 16 bits of the
bridge ID, while this parameter supplies the remaining (least significant)
48 bits.
The spanning tree uses the bridge ID to select the root bridge. In selecting
the root bridge, the spanning tree chooses the bridge with the lowest
bridge ID number. Thus, the lower the setting of Bridge Priority, the more
likely it is that the router will be selected as the root bridge. In the event of
equal Bridge Priority values, the value of this parameter determines the
bridge’s priority.
Instructions: Enter a 48-bit MAC address expressed as a 12-digit hexadecimal value.
We recommend that you set this parameter to the MAC address of one of
the router’s spanning tree ports, preferably the one with the lowest
priority.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.2.1.5
Editing Bridge Parameters
Once you configure a circuit to support the bridge and, optionally, the spanning
tree algorithm, you use Configuration Manager to edit the bridge and spanning
tree parameters.
This section provides information on how to access and edit these parameters.
You access all bridge parameters from the Configuration Manager window
(Figure
1-14). (Refer to Using Site Manager Software guide for details on
accessing this window.)
Note: If you enable the spanning tree algorithm for your network, the
algorithm reconverges if you dynamically change any of the parameters
described in the following sections.
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 209 210

Comentarios a estos manuales

Sin comentarios