
Using Source Routing Bridge Services
114060 Rev. A 2-45
you can select either Proprietary or Standard; however, you must set
the same encapsulation format for both routers.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.2.1.24
Adding or Deleting a Bridge ID on the Bridge Entry List
You specify a bridge ID on the Bridge Entry list if you want to configure two or
more Bay Networks source routing bridges in parallel. (Refer to “Assigning
Bridge IDs, Internal LAN IDs, and Group LAN IDs” in this chapter for more
information.) The following sections describe how to add and delete a bridge ID
in the Bridge Entry list.
Adding a Bridge Entry to the Bridge Entry List
To add a bridge ID:
1. Select Protocols > Source Routing > Bridge Entry in the Configuration
Manager window (refer to r
efer to Figure 2-17).
The Source Routing Bridge IDs window appears, which lists the bridge IDs
currently configured on the network (Figure
2-20).
Figure 2-20. Source Routing Bridge IDs Window
Comentarios a estos manuales