Avaya Troubleshooting Routers Guía para resolver problemas Pagina 80

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 79
Troubleshooting Routers
5-2 117379-A Rev. A
Troubleshooting an ATM Connection
This section assumes that you have isolated a problem to an ATM interface. If not,
refer to Chapter 2 to determine whether these instructions apply.
How you troubleshoot ATM depends on your ATM configuration. First, follow the
steps in the section “Interf
ace Problems.Then, see “Troubleshooting ATM
LANE” on page 5-7, if applicable.
Interface Problems
Troubleshoot an ATM connection as follows:
1. Use the Events Manager or the Technician Interface to enable extended
debugging for the wfAtmInterface MIB objects.
The Technician Interface command is as follows:
g wfAtmInterfaceConfEntry.wfAtmInterfaceDebug.*
2.
Filter the log to display only messages from the ATM entity running on
the slots experiencing the problem.
The Technician Interface command is as follows:
log -fftwid -eATM -eATMINTF -s
<slot_no.>
For example, if you are filtering events from slots 3 and 4, enter the following
command:
log -fftwid -eATM -eATMINTF -s3 -s4
3.
Use the Events Manager or the Technician Interface to display the
attributes associated with the MIB objects in T
able 5-1.
Vista de pagina 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 265 266

Comentarios a estos manuales

Sin comentarios