
Packet Configuration
117379-A Rev. A C-5
Current value for Receive Filter Two Type is 3
Press return for current value or enter new value:
Packet Capture Transmit Capture Filter Configuration
----------------------------------------------------
Transmit Filter One Type Options
--------------------------------
1: Capture
3: Not Used
Current value for Transmit Filter One Type is 3
Press return for current value or enter new value:
Using the Load Subcommand
config packet load [
<slot>
] loads the Packet Capture utility on the specified slot.
<slot>
specifies the slot number for loading Packet Capture. You can enter the slot
number on the command line or have the script prompt you for it.
The following is a sample display of the
config packet load command:
Performing mount check...
Enter slot number to load Packet Capture: 5
Using the Unload Subcommand
config packet unload [
<slot>
] unloads the Packet Capture utility on the
specified slot.
<slot>
specifies the slot number for unloading Packet Capture. You can enter the
slot number on the command line or have the script prompt you for it.
The following is a sample display of the
config packet unload command:
Performing mount check...
Enter slot number to unload Packet Capture: 5
Comentarios a estos manuales