Avaya Troubleshooting Routers Guía para resolver problemas Pagina 214

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 213
Troubleshooting Routers
B-22 117379-A Rev. A
Setting the Filter Response to a Match
Enter the following Technician Interface command to set the response to the filter:
set wfPktCaptureEntry.
<attribute_no.>
.
<line_no.> <value>
;commit
<attribute_no.>
is one of the following:
14 for Receive Filter 1
Represents the wfPktCaptureRxFltr1Type attribute
24 for Receive Filter 2
Represents the wfPktCaptureRxFltr2Type attribute
19 for Transmit Filter 1
Represents the wfPktCaptureTxFltr1Type attribute
30 for Transmit Filter 2
Represents the wfPktCaptureTxFltr2Type attribute
<line_no.>
is the number displayed after you issued the get command in “Creating
an Instance of Packet Capture.To list the current line numbers associated with
Packet Capture, enter the command
list instances wfPktCaptureEntry.
<value>
is one of the following:
1 -- Packet Capture will copy only the packets containing the data that
matches the string.
2 -- Packet Capture will terminate when it matches data in a packet to the
string. Packet Capture will not copy the packet containing the match.
3 -- Packet Capture will copy every packet on a circuit, regardless of its
contents. If you use this setting, Packet Capture does not use the remaining
parameter settings for the associated filter.
Note: You can configure a filter as a capture type (1) or a trigger type (2), but
not both. If you configure two receive filters, one a capture filter and the other
a trigger filter, make Filter 2 the trigger filter.
Vista de pagina 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 265 266

Comentarios a estos manuales

Sin comentarios