Avaya Troubleshooting Routers Guía para resolver problemas Pagina 212

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 211
Troubleshooting Routers
B-20 117379-A Rev. A
<value>
is one of the following:
1 -- Packet Capture terminates when the Packet Capture file is full. If the
setting is not 1 and the file is full, Packet Capture overwrites the oldest
packets in the file.
2 -- Packet Capture terminates when data matches the value of the Filter 1
Match parameter for the packet direction queried.
3 -- Packet Capture terminates when data matches the value of the Filter 2
Match parameter for the packet direction queried.
4 -- Packet Capture runs until terminated manually. This is the default setting.
Example
Enter the following command if you configured the Packet Capture instance
associated with logical line 102101 to copy only incoming packets, and you want
it to terminate itself when it matches packet data to the Filter 2 Match set
parameters:
wfPktCaptureEntry.12.102101 3;commit
Caution: If you configure Packet Capture to copy both incoming and
outgoing packets, it copies them to a single file. Therefore, if you choose both
packet directions, and set one of these parameters (Receive Trigger or
Transmit Trigger) to 1, you must set the other parameter to 1. If you fail to do
this, Packet Capture may overwrite the oldest packets, regardless of whether
an interface received or transmitted them.
Vista de pagina 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 265 266

Comentarios a estos manuales

Sin comentarios