Avaya Troubleshooting Routers Guía para resolver problemas Pagina 239

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 238
Using the Technician Interface to Configure and Run Packet Capture
117379-A Rev. A B-47
Parameter: Type
Packet Capture supports four Type parameters.
Default: 3
Options: 1
| 2 | 3
Function: Sets Packet Capture filtering for each filter type.
Instructions: Set to 1 (capture) if you want Packet Capture to copy only the packets
containing the data that matches the string.
Set to 2 (trigger) if you want Packet Capture to terminate when it matches
data in a packet to the string. Packet Capture does not copy the packet
containing the match.
Set to 3 if you want Packet Capture to copy every packet on a circuit,
regardless of its contents.
Packet
Direction MIB Attribute Name
Filter
No. MIB Object ID
Attribute
No.
Incoming wfPktCaptureRxFltr1Type 1 1.3.6.1.4.1.18.3.4.21.1.1.14 14
Incoming wfPktCaptureRxFltr2Type 2 1.3.6.1.4.1.18.3.4.21.1.1.24 24
Outgoing wfPktCaptureTxFltr1Type 1 1.3.6.1.4.1.18.3.4.21.1.1.19 19
Outgoing wfPktCaptureTxFltr2Type 2 1.3.6.1.4.1.18.3.4.21.1.1.30 30
Note: You can configure a filter as a capture type or a trigger type, but not
both. If you want to configure two receive filters, one a capture filter and the
other a trigger filter, configure the trigger filter after the capture filter.
Vista de pagina 238
1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 265 266

Comentarios a estos manuales

Sin comentarios