Avaya Troubleshooting Routers Guía para resolver problemas Pagina 233

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 266
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 232
Using the Technician Interface to Configure and Run Packet Capture
117379-A Rev. A B-41
Parameter: Disable
Attribute Name: wfPktCaptureDisable
Attribute Number: 2
Default: 1 (Enable)
Options: 1 (Enable)
| 2 (Disable)
Function: Controls the state of the Packet Capture instance.
Instructions: Disabling an instance frees all resources allocated for the instance. If you
previously allocated a file stored in buffer memory, disabling the instance
is an easy way to free the file stored in buffer memory and to keep the
MIB instance for future captures.
MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.2
Parameter: State
Attribute Name: wfPktCaptureState
Attribute Number: 3
Default: 1 (Up)
Options: 1 (Up)
| 2 (Down) | 3 (Init) | 4 (Not present)
Up: An interface has registered and is enabled.
Down: An interface has registered, but has been disabled.
Init: Packet Capture is loaded on the slot, but there is no interface
registered for this instance.
Not present: Packet Capture is not loaded on the slot with which this
instance is connected.
Function: Indicates the state of the Packet Capture subsystem.
MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.3
Vista de pagina 232
1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 265 266

Comentarios a estos manuales

Sin comentarios