Avaya Configuring PPP Services Manual de usuario Pagina 96

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 95
Configuring PPP Services
3-42 117360-A Rev. A
Viewing Line Statistics for Multilink Circuits
To view the statistics that PPP collects for multilink circuits, use the Technician
Interface software to access the PPP MIB. For instructions on how to use this
software, refer to Using Technician Interface Software. Appendix C lists the PPP
multilink statistics and describes the data that they record. The key statistics to
check are the following:
In the wfPppCircuitEntry MIB:
-- wfPppCircuitMlFragPerm indicates that fragmentation is enabled.
-- wfPppCircuitMlFragTriggerSize indicates the smallest-size packet that
PPP may fragment.
-- wfPppCircuitMaxBuffers is the maximum allowable number of buffers
for this circuit.
-- wfPppCircuitMaxLinks is the maximum number of links allowed in the
multilink bundle for this circuit at any one time.
3. Choose Lines. The Lines window opens.
4. Set MRU Size (bytes). (See page A-28.)
5. If you have no other PPP line parameters
to configure, click on OK. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Site Manager Procedure
(continued)
You do this System responds
Vista de pagina 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 139 140

Comentarios a estos manuales

Sin comentarios