Avaya Configuring PPP Services Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Customizing PPP
117360-A Rev. A 3-35
Using the BCC
1. Enable link quality monitoring.
Enabling link quality monitoring on the interface allows all the other link
quality monitoring parameters to function. Navigate to the IP prompt and
enter the following command.
link-quality-protocol
value
value
is
none
LINKQR
2.
Enable the peer LQR timer.
To specify whether the remote peer should maintain the LQR timer for the
interface, enter the following command after setting the link quality protocol
to LINKQR.
peer-lqr-timer
value
value
is
enable
disable
3.
Set the LQR reporting period.
To specify the LQR reporting period, enter the following command.
lqr-reporting-period
seconds
seconds
is an integer in the range 1 through 120.
4. Set the inbound link quality.
To specify the inbound link quality, enter the following command after setting
the link quality protocol to LINKQR.
lqr-percentage-received
percent
percent
is an integer in the range 0 through 100.
Note: A summary example, showing the use of all the BCC link monitoring
commands, follows these syntax descriptions.
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 139 140

Comentarios a estos manuales

Sin comentarios