Avaya Configuring PPP Services Manual de usuario Pagina 117
- Pagina / 140
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PPP Parameters
117360-A Rev. A A-19
Parameter: Local PAP ID
Path: Protocols > PPP > Interfaces > Lines
Default: None
Options: Any text string; maximum 25 characters
Function: Specifies the PAP ID assigned to this interface. During the interface’s
authentication phase, all password authenticate-request messages the peer router
sends to this interface must include the correct PAP ID. Otherwise, the interface
sends an authenticate-NAK message and the link is not created.
Instructions: If you have not enabled PAP, ignore this field.
If you set the Local Authentication Protocol parameter to PAPAUTH, specify a
unique local PAP ID for this interface. To implement your changes, set the
Enable (LCP) parameter to Disable, apply the change, and then reset the
parameter to Enable.
For dial services that use PAP, you must configure the local PAP ID through the
Dial menu. See Configuring Dial Services for details.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.17
Parameter: Local PAP Password
Path: Protocols > PPP > Interfaces > Lines
Default: None
Options: Any text string; maximum 25 characters
Function: Specifies the PAP password assigned to this interface. During the interface’s
authentication phase, all password authenticate-request messages sent to this
interface by the peer router must include the correct PAP password. Otherwise,
the peer router sends an authenticate-NAK message and the link is not created.
Instructions: If you have not enabled PAP, ignore this field.
If you set the Local Authentication Protocol to PAPAUTH, specify a unique
local PAP password for this interface. To implement your changes, set the
Enable (LCP) parameter to Disable, apply the change, and then reset the
parameter to Enable.
For dial services that use PAP, you must configure the local PAP password
through the Dial menu. See Configuring Dial Services for details.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.18
- Configuring PPP 1
- Services 1
- Contents 5
- 117360-A Rev. A 11
- About This Guide 13
- Conventions 14
- Acronyms 15
- Bay Networks Customer Service 17
- How to Get Help 17
- Chapter 1 19
- Starting PPP Services 19
- Summary of PPP Services 20
- Starting Configuration Tools 21
- Starting PPP 22
- Using the BCC 23
- Using Site Manager 23
- Deleting PPP Services 24
- Where to Go Next 25
- Chapter 2 27
- PPP Concepts 27
- PPP Overview 28
- • Password Authentication 29
- • Challenge Handshake 29
- Routing over a PPP Link 30
- Initializing a PPP Interface 31
- 2-6 117360-A Rev. A 32
- 2-8 117360-A Rev. A 34
- One-Way Authentication 35
- Datagram Encapsulation 36
- PPP Dial Services Support 36
- Dial-on-Demand 37
- Bandwidth-on-Demand 37
- Dial Backup 37
- PPP Multiline 38
- PPP Multilink 38
- Using PPP Multilink 39
- 2-14 117360-A Rev. A 40
- Figure 2-4. Multilink Circuit 40
- Balancing Traffic Loads 41
- Using Multilink Fragmentation 42
- 2-18 117360-A Rev. A 44
- Monitoring PPP Link Quality 46
- PPP Data Compression 48
- PPP Line Parameters 50
- Detecting Loopback Conditions 51
- 2-26 117360-A Rev. A 52
- PPP Interoperability 53
- Chapter 3 55
- Customizing PPP 55
- 3-2 117360-A Rev. A 56
- Enabling PPP on an Interface 57
- Setting Up Remote Addresses 58
- Configuring AppleTalk 60
- 3-8 117360-A Rev. A 62
- 3-10 117360-A Rev. A 64
- Table 3-1. PPP Modes 65
- 3-12 117360-A Rev. A 66
- Configuring Data Encryption 67
- Customizing PPP Lines 68
- Editing PPP Line Parameters 69
- Setting the Restart Timer 72
- Customizing PAP 81
- Customizing CHAP 84
- 3-34 117360-A Rev. A 88
- 3-36 117360-A Rev. A 90
- Disabling Loopback Checking 93
- 3-42 117360-A Rev. A 96
- Appendix A 99
- Configuring PPP Services 100
- A-2 117360-A Rev. A 100
- 101
- A-8 117360-A Rev. A 106
- PPP Parameters 107
- 110
- A-16 117360-A Rev. A 114
- 116
- A-20 117360-A Rev. A 118
- 119
- A-24 117360-A Rev. A 122
- A-26 117360-A Rev. A 124
- A-28 117360-A Rev. A 126
- Appendix B 127
- Default PPP Configuration 127
- B-2 117360-A Rev. A 128
- Default PPP Configuration 129
- Appendix C 131
- PPP Statistics 131
- C-2 117360-A Rev. A 132
- Table C-1. PPP Statistics 132
- 117360-A Rev. A Index-1 133
- 117360-A Rev. A Index-3 135
- 117360-A Rev. A Index-5 137
- 117360-A Rev. A Index-7 139
Relacionado con productos y manuales para Redes Avaya Configuring PPP Services
Redes Avaya Business Communications Manager - Interactive Voice Response Guía de configuración
(68 paginas)
(68 paginas)
Redes Avaya 56/64K Manual de usuario
(36 paginas)
(36 paginas)
Redes Avaya Configuring SMDS Manual de usuario
(48 paginas)
(48 paginas)
Redes Avaya Configuring LLC Services Manual de usuario
(128 paginas)
(128 paginas)
Redes Avaya Configuring Aura Messaging 6.1 as a Voice Messaging Solution Manual de usuario
(47 paginas)
(47 paginas)
Redes Avaya Integrated Management Release 3.0 Enterprise Network Management Manual de usuario
(76 paginas)
(76 paginas)
Redes Avaya Business Communication Manager Interoperability with Communication Server 1000 Manual de usuario
(20 paginas)
(20 paginas)
Redes Avaya Configuring BOOTP Services Manual de usuario
(174 paginas)
(174 paginas)
Redes Avaya Configuring PPP Services Manual de usuario
(152 paginas)
(152 paginas)
Redes Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario
(224 paginas)
(224 paginas)
Redes Avaya ALGO-8028-SM Manual de usuario
(29 paginas)
(29 paginas)
Redes Avaya P332MF Manual de usuario
(182 paginas)
(182 paginas)
Redes Avaya IPTM96-CM601 Manual de usuario
(30 paginas)
(30 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.064 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales