Avaya Configuring PPP Services Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
Customizing PPP
117360-A Rev. A 3-25
Customizing PPP Authentication Parameters
PPP imposes network security by offering support for two types of authentication
protocols: Password Authentication Protocol (PAP) and Challenge Handshake
Authentication Protocol (CHAP).
Site Manager lets you configure the PPP authentication parameters; the BCC does
not. The following sections describe how to configure PPP to implement PAP and
CHAP.
You must first specify what, if any, local authentication protocol this interface
uses. The Local Authentication Protocol parameter specifies the type of
authentication protocol that this interface uses: None, PAP, or CHAP.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Choose Lines. The Lines window opens.
4. Set Convergence Timer.
(See page A-27.)
5. If you have no other PPP line parameters
to configure, click on OK. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Note: For all dial services, you must use PAP or CHAP, either of which
provides an identification mechanism that is essential to bring up demand,
backup, and bandwidth lines. You must configure the CHAP local name,
CHAP secret, PAP ID, and PAP password through the Dial menu. See
Configuring Dial Services for details.
In addition, for all dial services, failure of either authentication protocol causes
the connection to be dropped, and no intervention from the network
administrator is needed.
For leased lines, the authentication phase is optional.
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 139 140

Comentarios a estos manuales

Sin comentarios