Avaya Configuring PPP Services Manual de usuario descargar pdf (Pagina 24)

Configuring PPP Services

1-6 117360-A Rev. A

Deleting PPP Services

You can delete PPP from a speciﬁc circuit by simply reconﬁguring that circuit

with a different conﬁguration ﬁle that does not use PPP.

The way you delete PPP from all circuits on which it is currently conﬁgured

depends on the tool you are using. For detailed information, refer to Conﬁguring

and Managing Routers with Site Manager or Using the Bay Command Console,

as appropriate.

Using the BCC

1. To delete PPP from a circuit, navigate to the ppp prompt and type delete.

Deleting any object also deletes its subordinate objects.

For example, the following command deletes PPP from the interface on slot 3,

connector 1.

ppp/3/1 delete

2. To delete an interface (or other object), navigate to the prompt for that

object and type

delete.

For example, the following command deletes the synchronous interface on

slot 3, connector 1.

sync/3/1 delete

Using Site Manager

To use Site Manager to delete PPP from a circuit, do the steps summarized in the

following table.

Caution: The BCC does not warn you before deleting objects.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 139 140

Sin comentarios

Avaya Configuring PPP Services Manual de usuario Pagina 24