Avaya Configuring PPP Services Manual de usuario Pagina 124
- Pagina / 140
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring PPP Services
A-26 117360-A Rev. A
Parameter: Async Control Character Map
Path: Protocols > PPP > Interfaces > Lines
Default: 655360
Range: 0 through 4294967295 (0x00 through 0xFFFFFFFF)
Function: This parameter is relevant only if you use an asynchronous modem. During LCP
negotiations, the peers negotiate the characters that they will recognize as
modem control characters.
The async control character map specifies a value representing one or more
asynchronous modem control characters for the peer to recognize (“escape”)
and that may occur in the data packet. Each bit in the map represents a control
character from 0x00 through 0x1F. The default value serves for almost all
modems. It escapes the asynchronous modem control sequence XON/XOFF
(0x11 and 0x13) if they occur in the data stream. The values 0x7D and 0x7E are
always escaped.
PPP displays the decimal number equivalent to the string and uses that value in
its link negotiations.
Instructions: Accept the default value 655360 (0x000A0000) or enter the value
corresponding to the asynchronous control character map for the character(s)
that you want recognized (“escaped”) in the data stream. It is unusual to require
a value other than the default.
If you must create a different map, here’s how to do it. The map consists of 32
bits. Each bit corresponds to one control character, 0x00 (the right end of the
map) through 0x1F (the left end of the map); that is, 0 through 31, decimal.
If you have a modem that requires control characters different from the default,
determine the corresponding bit for each character by converting the hex value
of the control character to decimal. For example, 0x1F = 31 decimal, so to
escape that character, set the leftmost bit in the map. Do the same thing for each
control character to be escaped. Once you’ve decided what bits in the map to
set, enter either the hex character equivalent to the bit string or the decimal
equivalent. To escape all control characters in a packet, set the map to
0xFFFFFFFF.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.41
- Configuring PPP 1
- Services 1
- Contents 5
- 117360-A Rev. A 11
- About This Guide 13
- Conventions 14
- Acronyms 15
- Bay Networks Customer Service 17
- How to Get Help 17
- Chapter 1 19
- Starting PPP Services 19
- Summary of PPP Services 20
- Starting Configuration Tools 21
- Starting PPP 22
- Using the BCC 23
- Using Site Manager 23
- Deleting PPP Services 24
- Where to Go Next 25
- Chapter 2 27
- PPP Concepts 27
- PPP Overview 28
- • Password Authentication 29
- • Challenge Handshake 29
- Routing over a PPP Link 30
- Initializing a PPP Interface 31
- 2-6 117360-A Rev. A 32
- 2-8 117360-A Rev. A 34
- One-Way Authentication 35
- Datagram Encapsulation 36
- PPP Dial Services Support 36
- Dial-on-Demand 37
- Bandwidth-on-Demand 37
- Dial Backup 37
- PPP Multiline 38
- PPP Multilink 38
- Using PPP Multilink 39
- 2-14 117360-A Rev. A 40
- Figure 2-4. Multilink Circuit 40
- Balancing Traffic Loads 41
- Using Multilink Fragmentation 42
- 2-18 117360-A Rev. A 44
- Monitoring PPP Link Quality 46
- PPP Data Compression 48
- PPP Line Parameters 50
- Detecting Loopback Conditions 51
- 2-26 117360-A Rev. A 52
- PPP Interoperability 53
- Chapter 3 55
- Customizing PPP 55
- 3-2 117360-A Rev. A 56
- Enabling PPP on an Interface 57
- Setting Up Remote Addresses 58
- Configuring AppleTalk 60
- 3-8 117360-A Rev. A 62
- 3-10 117360-A Rev. A 64
- Table 3-1. PPP Modes 65
- 3-12 117360-A Rev. A 66
- Configuring Data Encryption 67
- Customizing PPP Lines 68
- Editing PPP Line Parameters 69
- Setting the Restart Timer 72
- Customizing PAP 81
- Customizing CHAP 84
- 3-34 117360-A Rev. A 88
- 3-36 117360-A Rev. A 90
- Disabling Loopback Checking 93
- 3-42 117360-A Rev. A 96
- Appendix A 99
- Configuring PPP Services 100
- A-2 117360-A Rev. A 100
- 101
- A-8 117360-A Rev. A 106
- PPP Parameters 107
- 110
- A-16 117360-A Rev. A 114
- 116
- A-20 117360-A Rev. A 118
- 119
- A-24 117360-A Rev. A 122
- A-26 117360-A Rev. A 124
- A-28 117360-A Rev. A 126
- Appendix B 127
- Default PPP Configuration 127
- B-2 117360-A Rev. A 128
- Default PPP Configuration 129
- Appendix C 131
- PPP Statistics 131
- C-2 117360-A Rev. A 132
- Table C-1. PPP Statistics 132
- 117360-A Rev. A Index-1 133
- 117360-A Rev. A Index-3 135
- 117360-A Rev. A Index-5 137
- 117360-A Rev. A Index-7 139
Relacionado con productos y manuales para Redes Avaya Configuring PPP Services
Redes Avaya Business Communications Manager - Interactive Voice Response Guía de configuración
(68 paginas)
(68 paginas)
Redes Avaya 56/64K Manual de usuario
(36 paginas)
(36 paginas)
Redes Avaya Configuring SMDS Manual de usuario
(48 paginas)
(48 paginas)
Redes Avaya Configuring LLC Services Manual de usuario
(128 paginas)
(128 paginas)
Redes Avaya Configuring Aura Messaging 6.1 as a Voice Messaging Solution Manual de usuario
(47 paginas)
(47 paginas)
Redes Avaya Integrated Management Release 3.0 Enterprise Network Management Manual de usuario
(76 paginas)
(76 paginas)
Redes Avaya Business Communication Manager Interoperability with Communication Server 1000 Manual de usuario
(20 paginas)
(20 paginas)
Redes Avaya Configuring BOOTP Services Manual de usuario
(174 paginas)
(174 paginas)
Redes Avaya Configuring PPP Services Manual de usuario
(152 paginas)
(152 paginas)
Redes Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario
(224 paginas)
(224 paginas)
Redes Avaya ALGO-8028-SM Manual de usuario
(29 paginas)
(29 paginas)
Redes Avaya P332MF Manual de usuario
(182 paginas)
(182 paginas)
Redes Avaya IPTM96-CM601 Manual de usuario
(30 paginas)
(30 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales