
Configuring PPP Services
3-26 117360-A Rev. A
If you do not want to enable security features on this interface, accept the default,
None.
To enable Password Authentication Protocol, select PAPAUTH. Then define the
Local PAP ID and Local PAP Password parameters for this interface.
To enable Challenge Handshake Authentication Protocol, select CHAP. Then
define the CHAP Secret, CHAP Local Name, and CHAP Periodic Timer
parameters for this interface.
Using the BCC
The BCC does not allow you to configure this parameter.
Using Site Manager
To set the local authentication protocol for this interface, do the tasks in the
following table.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Choose Lines. The Lines window opens.
4. Set Local Authentication Protocol.
(See page A-18.)
5. If you specified
• None, continue with the next step in this
table.
• PAPAUTH or CHAP, continue at “
Setting a
Time Limit for Authentication” on
Chapter
3-26.
6. If you have no other PPP line parameters
to configure, click on OK. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Comentarios a estos manuales