Avaya Configuring PPP Services Manual de usuario Pagina 95
- Pagina / 140
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Customizing PPP
117360-A Rev. A 3-41
• As you upgrade each remote-site router software to Version 11.02 (or later),
set its MRU value to 1590, unless you can segregate the 11.02 (or later)
remote sites into their own demand pool. You can do this if some of the
remote-site routers are CLAM routers, provided they are running a CLAM
release prior to 3.522R. CLAM routers running software earlier than 3.522R
let you set the default MRU value to 1590.
• If some remote-site CLAM routers are running release 3.522R, then you
cannot set the MRU value to 1590. In this case, isolate those CLAM routers in
their own demand pool on the 11.02 (or later) router and set the MRU value of
that pool to 1500.
• Upgrade the central-site router to Version 11.02 (or later), and set the default
MRU value to 1500. Then reconfigure all remote-site routers dialing into that
demand pool with the same MRU value.
For pre-11.02 routers, change the MRU setting to 1500.
• Change the MRU value in the Sync Driver MTU attribute (the 1510 value
becomes 1500 after subtracting CRC and PPP headers) of the pre-11.02 router
to 1510. CLAM routers running Release 3.52R use the default setting of
1500.
• If you upgrade the central-site router to 11.02 (or later) and the default MRU
value of 1500 is taken on one pool (to satisfy 3.522R CLAM routers or 11.02
[or later] routers), you can choose a different default value (for example,
1590) for a different pool that the 11.02 or pre-3.522R CLAM router dials
into.
Using the BCC
The BCC does not allow you to configure this parameter.
Using Site Manager
To set the MRU for this line, do the tasks in the following table.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
(continued)
- Configuring PPP 1
- Services 1
- Contents 5
- 117360-A Rev. A 11
- About This Guide 13
- Conventions 14
- Acronyms 15
- Bay Networks Customer Service 17
- How to Get Help 17
- Chapter 1 19
- Starting PPP Services 19
- Summary of PPP Services 20
- Starting Configuration Tools 21
- Starting PPP 22
- Using the BCC 23
- Using Site Manager 23
- Deleting PPP Services 24
- Where to Go Next 25
- Chapter 2 27
- PPP Concepts 27
- PPP Overview 28
- • Password Authentication 29
- • Challenge Handshake 29
- Routing over a PPP Link 30
- Initializing a PPP Interface 31
- 2-6 117360-A Rev. A 32
- 2-8 117360-A Rev. A 34
- One-Way Authentication 35
- Datagram Encapsulation 36
- PPP Dial Services Support 36
- Dial-on-Demand 37
- Bandwidth-on-Demand 37
- Dial Backup 37
- PPP Multiline 38
- PPP Multilink 38
- Using PPP Multilink 39
- 2-14 117360-A Rev. A 40
- Figure 2-4. Multilink Circuit 40
- Balancing Traffic Loads 41
- Using Multilink Fragmentation 42
- 2-18 117360-A Rev. A 44
- Monitoring PPP Link Quality 46
- PPP Data Compression 48
- PPP Line Parameters 50
- Detecting Loopback Conditions 51
- 2-26 117360-A Rev. A 52
- PPP Interoperability 53
- Chapter 3 55
- Customizing PPP 55
- 3-2 117360-A Rev. A 56
- Enabling PPP on an Interface 57
- Setting Up Remote Addresses 58
- Configuring AppleTalk 60
- 3-8 117360-A Rev. A 62
- 3-10 117360-A Rev. A 64
- Table 3-1. PPP Modes 65
- 3-12 117360-A Rev. A 66
- Configuring Data Encryption 67
- Customizing PPP Lines 68
- Editing PPP Line Parameters 69
- Setting the Restart Timer 72
- Customizing PAP 81
- Customizing CHAP 84
- 3-34 117360-A Rev. A 88
- 3-36 117360-A Rev. A 90
- Disabling Loopback Checking 93
- 3-42 117360-A Rev. A 96
- Appendix A 99
- Configuring PPP Services 100
- A-2 117360-A Rev. A 100
- 101
- A-8 117360-A Rev. A 106
- PPP Parameters 107
- 110
- A-16 117360-A Rev. A 114
- 116
- A-20 117360-A Rev. A 118
- 119
- A-24 117360-A Rev. A 122
- A-26 117360-A Rev. A 124
- A-28 117360-A Rev. A 126
- Appendix B 127
- Default PPP Configuration 127
- B-2 117360-A Rev. A 128
- Default PPP Configuration 129
- Appendix C 131
- PPP Statistics 131
- C-2 117360-A Rev. A 132
- Table C-1. PPP Statistics 132
- 117360-A Rev. A Index-1 133
- 117360-A Rev. A Index-3 135
- 117360-A Rev. A Index-5 137
- 117360-A Rev. A Index-7 139
Relacionado con productos y manuales para Redes Avaya Configuring PPP Services
Redes Avaya Business Communications Manager - Interactive Voice Response Guía de configuración
(68 paginas)
(68 paginas)
Redes Avaya 56/64K Manual de usuario
(36 paginas)
(36 paginas)
Redes Avaya Configuring SMDS Manual de usuario
(48 paginas)
(48 paginas)
Redes Avaya Configuring LLC Services Manual de usuario
(128 paginas)
(128 paginas)
Redes Avaya Configuring Aura Messaging 6.1 as a Voice Messaging Solution Manual de usuario
(47 paginas)
(47 paginas)
Redes Avaya Integrated Management Release 3.0 Enterprise Network Management Manual de usuario
(76 paginas)
(76 paginas)
Redes Avaya Business Communication Manager Interoperability with Communication Server 1000 Manual de usuario
(20 paginas)
(20 paginas)
Redes Avaya Configuring BOOTP Services Manual de usuario
(174 paginas)
(174 paginas)
Redes Avaya Configuring PPP Services Manual de usuario
(152 paginas)
(152 paginas)
Redes Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario
(224 paginas)
(224 paginas)
Redes Avaya ALGO-8028-SM Manual de usuario
(29 paginas)
(29 paginas)
Redes Avaya P332MF Manual de usuario
(182 paginas)
(182 paginas)
Redes Avaya IPTM96-CM601 Manual de usuario
(30 paginas)
(30 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales