Avaya Configuring PPP Services Manual de usuario Pagina 109

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 108
PPP Parameters
117360-A Rev. A A-11
Parameter: Bridge FDDI
Path: Protocols > PPP > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Specifies whether this PPP interface accepts bridged traffic that is FDDI
encapsulated, then forwards it over the PPP network.
Instructions: Set to Disable to refuse bridged, FDDI-encapsulated frames on this PPP
interface.
If this interface has been up and running, you must also set the Bridge Enable
parameter to Disable, apply the change, and then reset the Bridge Enable
parameter to Enable to implement your changes.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.42
Parameter: Bridge Token Ring
Path: Protocols > PPP > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Specifies whether this PPP interface accepts bridged traffic that is token ring
encapsulated, then forwards it over the PPP network. The token ring network
must support source routing; the router expects all token ring-bridged frames to
be source routed.
Instructions: Set to Disable if you do not want the PPP interface to accept bridged, token
ring-encapsulated frames.
If this interface has been up and running, you must also set the Bridge Enable
parameter to Disable, apply the change, and then reset the Bridge Enable
parameter to Enable to implement your changes.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.44
Vista de pagina 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 139 140

Comentarios a estos manuales

Sin comentarios