Avaya Configuring PPP Services Manual de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
Configuring PPP Services
3-16 117360-A Rev. A
Remote PAP ID
Remote PAP Password
Link Quality Protocol
Peer Link Quality Report Timer
LQR Reporting Period
CHAP Secret
CHAP Local Name
CHAP Periodic Timer
Asynchronous Control Character Map
Authentication Timer
Convergence Timer
Magic Num Disable
Using the BCC
To force LCP negotiation using BCC, navigate to the ppp prompt and enter
state disable
then enter
state enable
For example, the following commands force LCP renegotiation on interface 3/1
by first disabling, then re-enabling PPP.
ppp/3/1# state disable
ppp/3/1# state enable
Using Site Manager
Disable and then reenable the Enable (LCP) parameter. You can change as many
parameters as necessary before forcing the renegotiation. After making all your
changes to these parameters:
1. Set the Enable (LCP) parameter to Disable and, if necessary, apply the
changes.
2. Reset the Enable (LCP) parameter to Enable and, if necessary, apply the
changes.
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 139 140

Comentarios a estos manuales

Sin comentarios