Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
Customizing DVMRP
117355-D Rev 00
4-5
How DVMRP Chooses a Route
Each DVMRP interface is configured with a metric that indicates the cost of the
hop. A router that receives multiple route reports for the same multicasting source
network:
Compares the cost specified in each (based on the metric field)
Stores information from the report with the lowest cost in its routing table
A route metric is the sum of all the interface (hop) metrics from a given route
source to a given router.
In Figure 4-1
on page 4-3, for example, router D receives two reports for the
network connected to multicast router A: one from router B and one from router
C. Using the metrics contained in the route reports, router D determines that the
cost of the tunneled route is greater than the cost of the route that uses direct
physical connections. Router D discards the route received from router C and
stores the route received from router B.
Router D then declares router B to be the next-hop neighbor and interface d1 to be
the next-hop interface. After a next-hop neighbor has been declared for a route,
the route updates received from that neighbor for that route take precedence until
either the route times out or until another router advertises a better metric for that
route.
Vista de pagina 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 379 380

Comentarios a estos manuales

Sin comentarios