Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 315

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 314
Site Manager Parameters
117355-D Rev 00
A-37
OSPF Interface Parameters
PIM Parameters
PIM Global Configuration Parameters
Use the following descriptions to set PIM global configuration parameters.
Parameter: Multicast Forwarding
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: Multicast
Options: Blocked
|
Multicast
|
Unicast
Function: Specifies the way multicast packets should be forwarded on this interface: not
forwarded, forwarded as data link multicasts, or forwarded as data link
unicasts. Data link multicasting is not meaningful on point-to-point and
NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively
disables all multicast forwarding.
Instructions: If you configured MOSPF globally, specify the way that you want IP to
forward multicast packets on this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.30
Parameter: Enable
Path: Configuration Manager > Protocols > IP > PIM > Global
Default: Enable
Options: Enable
|
Disable
Function: Enables and disables PIM support on the router. Enabling PIM on an interface
automatically enables IGMP.
Instructions: To disable PIM after you configure it on the router, specify Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.14.1.2
Vista de pagina 314
1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 379 380

Comentarios a estos manuales

Sin comentarios