Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
Customizing Protocol Independent Multicast
117355-D Rev 00
6-35
Enabling and Disabling IGMP Relay on a Downstream Router
An IGMP Relay device is a unicast router with an interface to a multicast router
and interfaces to one or more networks containing network hosts. A router
configured as an IGMP Relay device provides group registration services for an IP
multicast router in a PIM environment. For more information about IGMP Relay,
see Chapter 9, “Configuring IGMP Relay.”
By default, IGMP Relay support for downstream routers is disabled. When you
enable IGMP Relay support for a downstream router, PIM receives multicast data
from the downstream router, encapsulates the data within a register packet, and
sends the packets to the elected RP in the PIM domain.
To enable and disable IGMP Relay support for a downstream router, complete the
following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
PIM
. The PIM menu opens.
4. Choose
Interface
. The PIM Interface Parameters window
opens.
5. Set the
Downstream IGMP Relay
parameter. Click on
Help
or see the
parameter description on page A-53.
6. Click on
OK
. You return to the Configuration Manager
window.
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 379 380

Comentarios a estos manuales

Sin comentarios