
Configuring IP Multicasting and Multimedia Services
A-12
117355-D Rev 00
DVMRP Tunnel Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables this tunnel.
Instructions: Specify Disable to disable the tunnel.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.2
Parameter: Encapsulation Mode
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: IP Datagram
Options: IP Datagram
|
LSSR Option
Function: Specifies whether tunneled datagrams are encapsulated within an IP datagram
or loosely encapsulated using the LSSR option.
Instructions: See RFC 1075 for information about the LSSR option, which is provided for
backward compatibility.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.6
Parameter: Metric
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: 1
Options: 1 to 31
Function: Specifies the cost of this tunnel.
Instructions: Determine the cost that you want to assign to this tunnel and enter a value. Bay
Networks recommends the following values: for a LAN or tunnel across a
single LAN: 1; for a multihop tunnel: 2 or 3; for a serial link or tunnel across a
serial link: 1; for a backup tunnel: the primary tunnel metric + 1.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.7
Comentarios a estos manuales