Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 287

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 286
Site Manager Parameters
117355-D Rev 00
A-9
Parameter: Threshold
Path: Configuration Manager > Protocols > IP > DVMRP > Circuit
Default: 1
Options: 1 to 254
Function: Specifies (in hops) a TTL value for the interface. This value is the minimum IP
TTL required for a multicast datagram to be forwarded out this interface.
Instructions: Use this parameter to control the scope of the datagrams. If the IP TTL is less
than the threshold value you specify, the router drops the datagram.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.7
Parameter: Forward Cache Size
Path: Configuration Manager > Protocols > IP > DVMRP > Circuit
Default: 32
Options: 32 to 512
Function: Specifies the maximum number of entries allowed in the forwarding table
associated with this interface.
Instructions: When configuring a cache size, you must also keep in mind the TTL value for
entries. If you specify a large cache size, a larger TTL value is recommended. For
a smaller cache, a shorter TTL for cache entries is recommended.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.14
Parameter: Forward Cache TTL
Path: Configuration Manager > Protocols > IP > DVMRP > Circuit
Default: 7200
Options: 300 to 86,400 (seconds)
Function: Specifies in seconds the TTL for an entry in the forwarding table.
Instructions: Enter a value from 300 seconds (5 minutes) through 86,400 seconds (24
hours). If the neighbor is running DVMRP mrouted, Bay Networks
recommends a TTL value of 300 seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.15
Vista de pagina 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 379 380

Comentarios a estos manuales

Sin comentarios