Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 158

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 157
Configuring IP Multicasting and Multimedia Services
4-68
117355-D Rev 00
Specifying the Lifetime of a Prune Message
By default, a prune message that DVMRP sends to a neighbor on this tunnel has a
lifetime of 7200 seconds (2 hours).
You can use the BCC or Site Manager to specify a lifetime value from 0 through
86,400 seconds (24 hours).
Using the BCC
To reset the lifetime of a prune message, navigate to a DVMRP tunnel prompt (for
example,
box; tunnels; dvmrp/2.2.2.2/2.2.4.5
) and enter:
prune-lifetime
<
seconds
>
seconds
is the lifetime of the prune message in seconds.
For example, the following command sets the lifetime value to 5000 seconds
(1 hour, 23 minutes, and 20 seconds) for prune messages that DVMRP sends on
tunnel 2.2.2.2/2.2.2.4:
dvmrp/2.2.2.2/2.2.2.4#
prune-lifetime 5000
dvmrp/2.2.2.2/2.2.2.4#
Using Site Manager
To specify the lifetime of a prune message, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
DVMRP
. The DVMRP menu opens.
4. Choose
Tunnel
. The DVMRP Tunnel Parameters window
opens.
5. Set the
Prune Life Time
parameter. Click
on
Help
or see the parameter description
on page A-15.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 379 380

Comentarios a estos manuales

Sin comentarios