
Configuring IP Multicasting and Multimedia Services
A-46
117355-D Rev 00
Parameter: Candidate RP Register Cache Timeout
Path: Configuration Manager > Protocols > IP > PIM > Global
Default: 210
Options: 5 to 65,535 (seconds)
Function: Specifies a timeout value, in seconds, for all cache entries whose inbound
interface is created from PIM register packets received on the RP router. If the
RP router does not receive the PIM register packet within the specified period of
time, it deletes the forwarding cache entry associated with this interface.
Instructions: Determine the timeout period that you require and specify a value. The highest
allowable value, 65,535 seconds, is equal to 18 hours, 12 minutes, and 15
seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.14.1.31
Parameter: Register Suppression Timeout
Path: Configuration Manager > Protocols > IP > PIM > Global
Default: 60
Options: 5 to 65,535 (seconds)
Function: Specifies the time period, in seconds, during which the first-hop router (DR)
disables the sending of register messages to the RP after receiving a
register-stop message from the RP.
The RP sends a register-stop message when it receives unencapsulated data
packets from the DR and there are no downstream routers (receivers) to forward
these packets to.
Instructions: Determine the timer interval that you require and specify a value. The highest
allowable value, 65,535 seconds, is equal to 18 hours, 12 minutes, and 15
seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.14.1.33
Comentarios a estos manuales