Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 304

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 380
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 303
Configuring IP Multicasting and Multimedia Services
A-26
117355-D Rev 00
IP Configuration Parameters
Parameter: Relay Circuit Type
Path: Configuration Manager > Protocols > IP > IGMP/IGMP Relay > Interfaces
Default: Downstream
Options: Primary
|
Backup
|
Downstream
Function: Specifies whether the IGMP circuit is configured as the primary upstream
circuit, the backup upstream circuit, or a downstream circuit.
Instructions: You can configure only one primary and one backup upstream circuit on the
router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.2.1.23
Parameter: Relay Report Interval
Path: Configuration Manager > Protocols > IP > IGMP/IGMP Relay > Interfaces
Default: 10
Options: 0 to any integer
Function: Specifies the interval (in seconds) between the initial group membership report
on an IGMP-R primary or backup circuit and a repetition of that report.
Instructions: Using 0 causes IGMP-R to send an unsolicited group report once only.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.2.1.24
Parameter: IP Address
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: 0.0.0.0 or any valid IP address
Function: Assigns a 32-bit IP address to the interface.
Instructions: Enter the IP address of the interface in dotted-decimal notation. Enter 0.0.0.0 to
configure an unnumbered interface on the circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.4
Vista de pagina 303
1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 379 380

Comentarios a estos manuales

Sin comentarios