Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 91)

Customizing Frame Relay

117376-C Rev. 00

3-21

To configure PVC pass-through:

Site Manager Procedure

You do this System responds

1. Configure at least two PVCs, using the

directions in the previous sections.

Remember that to use PVC pass-through

you must configure the PVCs you want to

map to each other on different lines.

2. Set the

Hybrid Mode

parameter to

ON

for

each of the PVCs that you want to

configure for pass-through, following the

procedure in the previous section.

3. Edit other parameters if you want, and

click on

Apply

.

The Select Protocols window opens.

4. Choose

FR PVC Passthru

from the menu

options. You can also choose

WCP

, but

configuring any other bridging protocols

will have no effect.

5. When you are finished, click on

OK

. You return to the FR PVC List for Service

window.

6. When you have finished adding PVCs,

click on

Done

.

You return to the FR Service List window.

7. Click on

Done

. You return to

8. Click on

Done

. You return to the main Configuration

Manager window.

9. Choose

Protocols

>

FR PVC Passthru

>

Mappings

from the menu bar.

The FR Passthru Mapping List window

opens.

10.Choose

Add

. The FR PVC Passthru Mapping Add

window opens. It directs you to “Select

first PVC for Passthru mapping:”

11.Choose the first PVC and click on

Select.

The FR PVC Passthru Mapping Add

window now displays a list of PVCs that

you can map to the first PVC. This list

consists of all PVCs that you have not

already configured for a mapping, and

that reside on lines other than the one for

the first PVC. The window now instructs

you to “Select second PVC for Passthru

mapping:”

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 239 240

Comentarios a estos manuales

Sin comentarios