Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 78)

Configuring Frame Relay Services

3-8

117376-C Rev. 00

For example, if you accept the default of 3 for the error threshold, and the default

of 4 for monitored events, three status exchange errors in a sequence of four

attempted exchanges brings the connection down. Similarly, if you set error

threshold to 5 and monitored events to 10, five status exchange errors in a

continuous sequence of 10 attempted exchanges brings the connection down.

You can use either the BCC or Site Manager to specify error threshold and

monitored events.

Using the BCC

To specify error threshold and monitored event values, use these instructions:

Polling Interval

To set the polling interval:

Navigate to the dlcmi prompt.

For example:

box; serial/1/2; frame-relay/1/2; dlcmi

Enter the

polling-interval

command and the value you want the network

to use.

polling-interval

is the polling interval in seconds; the legal values are 5 to 30

seconds.

For example, the following command line changes the polling interval from 5

to 20 seconds:

dlcmi/1/2# polling-interval 20

dlcmi/1/2#

Note:

The Error Threshold parameter and Monitored Events parameters do

not function if you set Mgmnt Type to DLCMI None.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 239 240

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 78