Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 121)

Customizing Frame Relay

117376-C Rev. 00

3-51

For example, the following command line sets a maximum of 200 SVCs:

signalling/3/2# maximum-svcs 200

signalling/3/2#

Setup Timer

Setup timer indicates the number of seconds allowed from the time the router

sends a setup message to the called subscriber and receives a connect or call

proceeding message from the called subscriber. If a timeout occurs, the router

retransmits the setup message and restarts the timer. If the timer expires a second

time, the call is cleared. To set the setup timer:

Navigate to the signaling prompt.

For example:

box; serial/1/2; frame-relay/1/2; signalling/1/2

Enter the

setup-timer

command and the value you want to use.

setup-timer

is the number of seconds allowed. Legal values are 2 to 90 seconds.

The default is 4.

For example, the following command line sets a timer of 10 seconds:

signalling/3/2# setup-timer 10

signalling/3/2#

Disconnect Timer

Disconnect timer indicates the number of seconds allowed from the time the

router sends a disconnect message and receives a release message back. If a

timeout occurs, the router sends a release message and enters the release request

state. The timer is not restarted. To set the disconnect timer:

Navigate to the signaling prompt.

For example:

box; serial/1/2; frame-relay/1/2; signalling/1/2

Enter the

disconnect-timer

command and the value you want to use.

disconnect-timer

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 239 240

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 121