Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 233)

Monitoring Frame Relay Using BCC show Commands

117376-C Rev. 00

C-25

signalling transmit

Displays signalling transmit statistics for frame relay interfaces. This command

allows for the following command filter and filter argument:

The output contains the following information:

-interface

<name>

Displays only SVCs configured on the specified interface.

Interface Interface on which the frame relay SVC resides.

Setup Indicates the number of seconds allowed from the time the

router sends a setup message to the called subscriber and

receives a connect or call proceeding message from the

called subscriber.

Call Proceeding Indicates the number of seconds allowed from the time the

router receives a call proceeding message to the time the

router receives a connect or disconnect message.

Connect Message sent by the called user to the network and by the

network to the calling user to indicate call acceptance by the

called user.

Disconnect Indicates the number of seconds allowed from the time the

router sends a disconnect message and receives a release

message back.

Release Indicates the number of seconds allowed for a call clearing

initiated by the other end of the connection or when the

disconnect timer expires.

Release Complete Indicates that the network returns a release complete

message to the subscriber in response to a release

message sent from the subscriber.

Status Message sent by the user or network in response to a

status enquiry or to report error conditions.

Unnumbered Frames Sent Number of unnumbered acknowledgment frames (UAs)

sent over SVCs to a subscriber or router.

Status Enquiry A message sent by the user or network to solicit a status

message.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 239 240

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 233