Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 73)

Customizing SNMP

308644-15.1 Rev 00

3-13

Configuring SNMP Community Managers

This section describes how to add and delete SNMP community members

(managers). It also describes how to configure managers to receive traps from the

SNMP agent.

Adding a Manager

After you add a community name on the router and assign access privileges to it,

you can add one or more community members (called managers). By default, the

IP address 0.0.0.0 is a manager in the public community.

Using the BCC

To add a manager to a community, navigate to the community prompt (for

example,

box; snmp; community/router1

) and enter:

manager address

<ip_address>

For example, the following command creates a manager with an IP address of

2.2.2.2 and assigns it to the community router1:

community/router1#

manager address 2.2.2.2

manager/router1/2.2.2.2#

Using Site Manager

To add a manager to a particular community, complete the following tasks:

Note:

When you add the first IP interface, Site Manager automatically creates

a read-write public community with a wildcard manager (0.0.0.0). For security

reasons, you should replace the public community and wildcard manager with

a unique community specifying a limited list of managers.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

(continued)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 73