Avaya Configuring BOOTP Services Manual de usuario Pagina 186

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 196
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 185
Configuring SNMP, BootP, and DHCP Services
B-6
308644-15.1 Rev 00
show bootp config
The
show bootp config
command displays values configured for several BootP
parameters. The output includes the following information:
show bootp relay-agent
The
show bootp relay-agent
command displays values configured for the BootP
relay agent. The output includes the following information:
Interface Address Network interface address.
State State of the BootP relay agent (enabled or disabled).
Min Seconds Minimum timeout value specified for BOOTREQUEST or
DHCP packets on the interface.
Max Hops Total number of forwarded BOOTREQUEST packets
received on this interface that were dropped due to a
hops field that exceeds the maximum specified for the
interface.
PassThruMode Pass through mode specified for the interface (BootP,
BootP-DHCP, or DHCP).
Agent Address Network interface address of the BootP relay agent.
Outbound Address Outbound network interface address of the relay agent.
State State of the relay agent (enabled or disabled).
PassThruMode Pass through mode specified for the interface (BootP,
BootP-DHCP, or DHCP).
Vista de pagina 185
1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 195 196

Comentarios a estos manuales

Sin comentarios