Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 28)

Configuring SNMP, BootP, and DHCP Services

1-8

308644-15.1 Rev 00

Using the BCC

To enable BootP/DHCP relay on an interface, go to the BootP prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter either:

pass-thru-mode bootp-dhcp

pass-thru-mode dhcp

For example, the following command sets the pass through mode to bootp-dhcp,

which enables the BootP relay agent on the router to transmit both BootP and

DHCP packets to the server.

bootp/2.2.2.2#

pass-thru-mode bootp-dhcp

bootp/2.2.2.2#

Using Site Manager

To enable BootP/DHCP relay on an interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. Enable BootP on the interface.

For instructions, see “Starting BootP

Services” on page 1-7.

2. Choose

Protocols.

The Protocols menu opens.

3. Choose

. The IP menu opens.

4. Choose

BOOTP

. The BOOTP menu opens.

5. Choose

Relay Agent Interface Table

. The BootP Relay Agent Interface Table

window opens.

6. Set the

Pass Through Mode

parameter to

DHCP

or to

BootP/DHCP

7. Click on

Apply

8. Edit the parameters in this window.

For instructions, see “

Customizing BootP

Relay Agent Parameters” on page 4-2.

You return to the Configuration Manager

window.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 195 196

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring BOOTP Services