Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 134)

Configuring SNMP, BootP, and DHCP Services

5-4

308644-15.1 Rev 00

Using the BCC

To allow DHCP operation, go to the preferred server prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0; bootp; preferred-server

) and enter:

pass-thru-mode <value>

value

is one of the following:

bootp

(default)

bootp-dhcp

dhcp

For example, this command line sets the pass through mode to bootp-dhcp, which

enables the BootP relay agent on the router to transmit both BootP and DHCP

packets to the server.

preferred-server/2.2.2.2/20.20.20.20#

pass-thru-mode bootp-dhcp

preferred-server/2.2.2.2/20.20.20.20#

Using Site Manager

To allow DHCP operation, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table window opens.

6. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-24

7. Click on

Apply

8. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 195 196

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 134

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring BOOTP Services