Avaya Configuring BOOTP Services Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 196
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
308644-15.1 Rev 00
xv
Preface
This guide describes Simple Network Management Protocol (SNMP), Bootstrap
Protocol (BootP), BootP/Dynamic Host Configuration Protocol (DHCP) relay,
and DHCP server and what you need to do to start and customize them on a Nortel
Networks
*
router.
You can use the Bay Command Console (BCC
*
) or Site Manager to configure
these services on a router. In this guide, you will find instructions for using both
the BCC and Site Manager.
Before You Begin
Before using this guide, you must complete the following procedures. For a new
router:
Install the router (see the installation guide that came with your router).
Connect the router to the network and create a pilot configuration file (see
Quick-Starting Routers, Configuring Remote Access for AN and Passport
ARN Routers, or Connecting ASN Routers to a Network).
Make sure that you are running the latest version of Nortel Networks BayRS
*
and
Site Manager software. For information about upgrading BayRS and Site
Manager, see the upgrading guide for your version of BayRS.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 195 196

Comentarios a estos manuales

Sin comentarios