Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 176)

Configuring SNMP, BootP, and DHCP Services

A-24

308644-15.1 Rev 00

DHCP Server Global Parameters

Use the following guidelines to configure DHCP server global parameters in the

DHCP Global Parameters window.

Parameter: Pass Through Mode

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv

Default: BOOTP

Options: BOOTP

DHCP

BOOTP/DHCP

Function: Specifies whether the interface relays BootP, DHCP, or both BootP and DHCP

requests to the target server.

Instructions: Select BOOTP to relay BootP requests. Select DHCP to relay DHCP requests.

Select BOOTP and DHCP to relay both kinds of requests.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.6

Parameter: Enable

Path: Configuration Manager > Protocols > Global Protocols > DHCP > Global

Default: Enable

Options: Disable

Enable

Function: Specifies whether the DHCP server is enabled or disabled on the router.

Instructions: Select Enable to enable the DHCP server on the router. Select Disable to disable

the DHCP server on the router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.2

Parameter: Server Manager IP Address

Path: Configuration Manager > Protocols > Global Protocols > DHCP > Global

Default: None

Options: Any valid IP address

Function: Specifies the IP address of the NetID Server Manager that provides and

manages DHCP lease information for this DHCP server.

Instructions: Enter the IP address of the NetID DHCP Server Manager.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.3

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 176