Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 115)

Customizing BootP

308644-15.1 Rev 00

4-15

You can use the BCC or Site Manager to specify the interface input/output address

pair.

Using the BCC

To specify the IP interface input/output address pair, go to the BootP interface

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter:

relay-agent <ip_address>

ip_address

specifies the outbound-address (in dotted-decimal notation) from

which you want to forward outgoing BOOTREQUEST packets. The IP interface

that receives the incoming BOOTREQUEST packets is derived from the IP

address of the specified for the BootP interface.

For example, the following command line forwards outgoing BOOTREQUEST

packets from 5.5.5.5. The relay agent receives the incoming BOOTREQUEST

packets on BootP interface 1.1.1.1.

bootp/1.1.1.1#

relay-agent 5.5.5.5

relay-agent/1.1.1.1/5.5.5.5# #

Using Site Manager

To specify the IP interface input/output address pair, complete the following

tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Click on

Add

. The BOOTP Addresses window opens.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 195 196

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 115

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring BOOTP Services