Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 30)

Configuring SNMP, BootP, and DHCP Services

1-10

308644-15.1 Rev 00

After you create and enable the DHCP server on the router, you must enable the

DHCP server on an IP interface. By default, the DHCP server is disabled on an IP

interface.

To enable the DHCP server on an IP interface, go to the BootP prompt (for

example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter:

dhcp-svr-state <state>

state

is one of the following:

enabled

disabled

(default)

For example, the following command enables DHCP server on IP interface

2.2.2.2:

bootp/2.2.2.2#

dhcp-server-state enabled

bootp/2.2.2.2#

Using Site Manager

To create and enable the DHCP server on the router, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

Global Protocols

. The Global Protocols menu opens.

3. Choose

DHCP

. The DHCP menu opens.

4. Choose

Create DHCP

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 30