Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 116)

Configuring SNMP, BootP, and DHCP Services

4-16

308644-15.1 Rev 00

Deleting an IP Interface Input/Output Address Pair

You can use the BCC or Site Manager to specify the interface input/output address

pair.

Using the BCC

To delete an input/output address pair from the BootP relay agent forwarding

table, go to the relay-agent interface prompt (for example,

box; eth 2/2;

ip/2.2.2.2/255.255.0.0; bootp; relay-agent

) and enter:

delete

For example, the following command deletes the BootP relay agent and

input/output address pair:

relay-agent/1.1.1.1/2.2.2.2#

delete

bootp/1.1.1.1#

7. Set the following parameters:

•

Input IP Address

• Output IP Address

Click on

Help

or see the parameter

descriptions beginning on page A-19

8. Click on

. You return to the BOOTP Relay Agent

Forwarding Table window.

9. Click on

Done

. You return to the BOOTP Relay Agent

Interface Table window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 116