Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 123)

Customizing BootP

308644-15.1 Rev 00

4-23

Specifying the Target Server’s Host Name

If you want to keep track of the names of BootP and DHCP servers, specify the

target server’s host name. The host name cannot exceed 63 ASCII characters,

including embedded spaces.

You can use the BCC or Site Manager to specify the host name of the target server.

Using the BCC

To specify the target server’s host name, go to the preferred-server interface

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp;

preferred-server

) and enter:

target-name

host _name>

host_name

is the name you assign to the preferred server.

For example, this command line assigns the host name Green to the preferred

server 3.3.3.3 configured on IP interface 2.2.2.2.

preferred-server/2.2.2.2/3.3.3.3#

target-name green

preferred-server/2.2.2.2/3.3.3.3#

7. Set the following parameters:

•

Relay Agent IP Address

•

Target Server IP Address

Click on

Help

or see the parameter

descriptions beginning on page A-22

8. Click on

. You return to the BOOTP Relay Agent

Preferred Server Table window.

9. Click on

Done

. You return to the BootP Relay Agent

Interface Table window.

10. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 195 196

Comentarios a estos manuales

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 123

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring BOOTP Services