Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 106)

Configuring SNMP, BootP, and DHCP Services

4-6

308644-15.1 Rev 00

Specifying the Maximum Number of Hops from Client to Server

A hop is the logical distance between a source device and a destination device.

Source-device combinations can include a BootP relay agent and a BootP server, a

client and a BootP relay agent, or two BootP relay agents.

By default, the maximum number of hops that a packet can take from the source

device to the destination device (client to server) is four. If the value in the hops

field of a BOOTREQUEST packet is greater than the configured maximum value,

the router drops the packet.

You can use the BCC or Site Manager to specify the maximum number of hops

from the client to the server.

Using the BCC

To specify the maximum number of hops from client to server, go to the BootP

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter:

max-hops

integer

is any number from 1 to 16. The default value is 4.

For example, the following command line specifies a maximum hops value of 10

for IP interface 2.2.2.2.

bootp/2.2.2.2#

max-hops 10

bootp/2.2.2.2#

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 106