Avaya Configuring BOOTP Services Manual de usuario descargar pdf (Pagina 117)

Customizing BootP

308644-15.1 Rev 00

4-17

Using Site Manager

To delete an input/output address pair from the BootP relay agent forwarding

table, complete the following tasks:

Disabling BootP Route Forwarding

By default, the route (interface) through which the router forwards BootP or

DHCP packets to servers on the network is enabled. You can disable BootP or

DHCP packet forwarding through this route.

You can use the BCC or Site Manager to disable BootP route forwarding.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Select the address pair that you want to

delete.

7. Click on

Delete

. The BOOTP Relay Agent Forwarding

Table window no longer displays the

address pair.

8. Click on

Done

. You return to the BootP Relay Agent

Interface Table window.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 195 196

Sin comentarios

Avaya Configuring BOOTP Services Manual de usuario Pagina 117