Avaya Configuring and Troubleshooting Bay Dial VPN (DVS) Networks Manual de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
Configuring and Troubleshooting Bay Dial VPN Services
8-14 303509-A Rev 00
Enabling L2TP on an Unconfigured WAN Interface
To enable L2TP on an unconfigured WAN interface, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose a WAN connector.
The Add Circuit window opens.
2. Accept the default circuit name or change
it, then click on
OK
.
The WAN Protocols window opens.
3. Choose
PPP or Frame Relay
then click
on
OK
.
The Select Protocols window opens.
4. Choose
L2TP
, then click on
OK
. The IP Configuration window opens.
5. Enter the IP address of the LNS (router),
then click on
OK
.
The L2TP Configuration window opens.
6. Set the following parameters:
RADIUS Primary Server IP Address
RADIUS Primary Server Password
RADIUS Client IP Address
7. Click on
OK
. The L2TP Tunneling Security window
opens.
8. Click on
OK
. The L2TP IP Interface List window opens,
followed by the L2TP IP Configuration
window.
9. Set the following parameters:
L2TP IP Interface Address
Subnet Mask
Site Manager displays a message
alerting you of the time delay to create
the L2TP tunnel circuits.
10.Click on
OK
. You return to the L2TP IP Interface List
window, which displays the IP interface
address and the subnet mask. A
message window opens that reads,
L2TP
Configuration is completed
.
11.Click on
OK
.
12.Click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 189 190

Comentarios a estos manuales

Sin comentarios