
Configuring the Layer 3 Gateway
303509-A Rev 00 7-3
c.
Specify the keys associated with this SPI value.
Each SPI value has a 128-bit key associated with it. You must set at least
one bit in this key. The key is displayed in Site Manager as four 32-bit
fields (8 hexadecimal digits per field).
d.
Click on OK to return to the Edit Mobile IP SPIs window.
The SPI/key combination specified here must match the SPI/key
combination set in the TMS. The keys on both the gateway and the TMS
specify the most-significant bit (that is, bit 127) first.
e.
Accept the default Authentication Type, MD5, and click on Done.
9.
Configure the RADIUS client on the gateway.
The RADIUS client resides on the gateway and communicates with the
RADIUS server on the destination network to authenticate dial-in users at
remote nodes. Dial VPN supports both the authentication and authorization
functions of RADIUS. To configure the RADIUS client:
a.
In the Configuration Manager window, select
Protocols > IP > DVS > VPN RADIUS.
The VPN RADIUS window opens, from which you can add or delete
RADIUS client or server entries.
b.
Click on the slot that corresponds to the home agent’s interface.
The window “Edit RADIUS for Slot
<slot_number>
” opens.
c.
Make sure that the Authentication parameter is set to Enable.
d.
If you want to enable full RADIUS accounting, set the Accounting
parameter to Enable.
e.
Specify the IP address of the RADIUS client.
f.
Accept the default values for all other parameters and click on OK.
The Dial VPN RADIUS window opens.
g.
Click on Servers.
The RADIUS Server List window opens.
Comentarios a estos manuales