Avaya Configuring Dial Services Manual de usuario descargar pdf (Pagina 70)

Configuring Dial Services

2-12

308621-14.00 Rev 00

5. Click on

OK

.

In most cases, you can use the defaults for

MCT1 and MCE1 parameters. To modify

these values, see

Configuring WAN Line

Services

.

The PRI Logical Lines window opens. For

the first PRI interface you configure, the

Timeslots window opens immediately

following the PRI Logical Lines window.

Each PRI port supports up to 23 logical B

channels for MCT1 ports or 30 logical B

channels for MCE1 ports.

6. Choose

Select All

to change all timeslots

to B channels. If you purchased selective

PRI service from your ISDN provider, go to

step 7.

All the timeslots now read B Channel.

7. Optionally, if you purchased selective PRI

service from your ISDN provider, select

individual timeslots.

Select only the timeslots that the service

provider assigns to you. For example, if

your provider assigns you timeslots 1

through 10, select slots 1 through 10 in the

Timeslots window.

A timeslot menu opens.

8. Select

B Channel

. Repeat the procedure

for each timeslot you want to configure.

The configured timeslot should now read

B channel.

9. Click on

OK

. You return to the PRI Logical Lines

window.

10. Click on

Done

. You return to the Configuration Manager

window.

11.Go to the next section, “Adding ISDN

Lines to a Pool.”

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 551 552

Comentarios a estos manuales

Sin comentarios