Avaya Configuring Dial Services Manual de usuario descargar pdf (Pagina 65)

Starting Dial Services Using Site Manager

308621-14.00 Rev 00

2-7

4. Enter a number for the

Demand/Backup/

Bandwidth Pool ID

parameter then click

on

OK

.

You can use the same ID for a demand,

backup, or bandwidth pool, but you cannot

use the same ID for two pools of the same

type.

Click on

Help

or see the parameter

description on page A-4.

The Lines Definition window opens.

5. Click on an available COM connector to

assign a line to the pool, but consider the

following:

• Do not select any COM lines that you

previously configured as leased lines.

• The lines that you select for a demand

pool must reside on the same slot.

• The lines that you select for a backup

or bandwidth pool can reside across

slots.

The Choose WAN Serial Interface Type

window, Sync Line Media Type window,

or Async Line Media Type window opens.

On the BLN and BCN, the Choose WAN

Serial Interface Type window opens only

for ports on an Octal Sync Link Module.

For all other modules, the Sync Line

Media Type window opens.

6. If applicable, set the

WAN Serial Interface

Type

parameter then click on

OK

. Click on

Help

or see the parameter description on

page A-5. Otherwise, go to step 7.

If you plan to use Asynchronous PPP for

your dial connections, you need to select

Async for this parameter.

(continued)

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 551 552

Comentarios a estos manuales

Sin comentarios