Avaya Configuring Dial Services Manual de usuario descargar pdf (Pagina 187)

100

101

Customizing Modem Lines

308621-14.00 Rev 00

10-5

Using Site Manager

To modify the line media type and cable type:

Modifying the Line Priority

For serial interfaces, you can prioritize lines in a pool, instructing the router which

line to use first, second, and so on when a dial line is required.

The lower the

number you assign to an interface, the higher its priority.

For dial backup and bandwidth-on-demand pools, lines can reside across slots, but

when you set the line priority, it affects only lines on the same slot. For example, if

the backup pool has two lines on slot 3 and two lines on slot 4, the router sets a

priority between the lines in slot 3, then between the lines in slot 4. For

bandwidth-on-demand, the router prioritizes lines in the preferred slot, then the

reserved slot, and finally, the local slot.

You can modify the line priority using the BCC or Site Manager, as described in

the following sections.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the COM connector whose

interface you want to change.

The connector name should have a D, B,

or W next to it.

The Edit Connector window opens.

2. Click on

Edit Line

. The Edit SYNC Parameters window

opens.

3. Set the following parameters:

• Line Media Type

• Cable Type

Click on

Help

or see the parameter

descriptions beginning on page A-5.

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 551 552

Comentarios a estos manuales

Sin comentarios

Avaya Configuring Dial Services Manual de usuario Pagina 187

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya Configuring Dial Services