Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 278
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
Configuring IP Multicasting and Multimedia Services
4-30
117355-C Rev 00
Disabling and Reenabling DVMRP on an Interface
By default, DVMRP is enabled on an interface. You can use the BCC or Site
Manager to disable and reenable it.
Using the BCC
Navigate to a DVMRP interface-level prompt and enter:
state
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command disables DVMRP on IP interface 2.3.4.5:
dvmrp/2.3.4.5#
state disabled
dvmrp/2.3.4.5#
Using Site Manager
To disable and reenable DVMRP on an interface:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
DVMRP
. The DVMRP menu opens.
4. Choose
Circuit
. The DVMRP Circuit Parameters window
opens.
5. Set the
Enable
parameter. Click on
Help
or see the parameter description on page
A-7.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 277 278

Comentarios a estos manuales

Sin comentarios