
Configuring RSVP
117355-C Rev 00
7-13
Enabling and Disabling UDP Encapsulation
By default, RSVP uses UDP encapsulation on this interface only if it determines
that a neighbor on the interface uses UDP encapsulation. Enable this feature on
the interface if manual configuration requires UDP encapsulation.
You can use Site Manager to enable and disable UDP encapsulation on the
interface.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
RSVP
. The RSVP menu opens.
4. Choose
Circuit
. The Edit RSVP Circuit Parameters
window opens.
5. Set the
Udp Required
parameter. Click on
Help
or see the parameter description on
page A-40.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales