Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario descargar pdf (Pagina 175)

Reserving Line Resources

117355-C Rev 00

8-13

Setting the Multiline Threshold Bandwidth

When using the first fit multiline select algorithm (see “Specifying the Multiline

Select Algorithm” on page 8-12), you can configure a threshold of 0 to

214,748,364 b/s for the first available line.

By default, the threshold is set to 0; LRM uses the simple first fit algorithm. If you

select a value greater than 0, LRM still uses the first available line with reservable

bandwidth to service requests, but moves to the next available line after reaching

the configured threshold. When all lines are at their threshold, LRM returns to

using the simple first fit algorithm.

Set this parameter only if you have configured LRM on a multiline circuit and

have set the Multiline Select Algorithm parameter to First Fit.

To set the multiline threshold bandwidth:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on any connector for a line that is

configured for RSVP.

The Edit Connector window opens.

2. Click on

Edit Line Resources

in the Edit

Connector window.

The Edit Line Resources window opens.

3. Set the

Multiline Threshold Bandwidth

parameter. Click on

Help

or see the

parameter description on page A-31.

* You set this parameter only if you configured the Resource Manager on a multiline circuit.

4. Click on

. You return to the Configuration Manager

window.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 277 278

Sin comentarios

Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 175